茶油皂脚脂肪酸甲酯制备的水溶性改性胺固化物性能研究  

Properties of the Cured Water-soluble Modified Amine from Fatty Acid Methyl Esters of Tea Oil Soapstock

作　　者：李梅[1,2,3,4] 夏建陵[1,2,3,4,5] 黄坤[1,2,3,4] 连建伟[1,2,3,4] 

机构地区：[1]中国林业科学研究院林产化学工业研究所 [2]生物质化学利用国家工程实验室 [3]国家林业局林产化学工程重点开放性实验室 [4]江苏省生物质能源与材料重点实验室,江苏南京210042 [5]中国林业科学研究院林业新技术研究所,北京100091

出　　处：《林产化学与工业》2011年第4期53-57,共5页Chemistry and Industry of Forest Products

基　　金："十一五"国家科技支撑计划资助(2009BADB1B10)

摘　　要：以茶油皂脚脂肪酸甲酯制备的水溶性改性胺(CA-921)与水性环氧树脂固化,通过热重分析、差示扫描量热法(DSC)、机械性能测试及扫描电镜分析,研究了环氧树脂分散相粒子的粒径和黏度、环氧基与胺氢物质的量之比及固化温度对固化物性能的影响。研究结果表明,黏度及粒径均较小的水性环氧乳液AB-EP-20与固化剂CA-921复配所得漆膜热稳定性较佳;水性环氧体系AB-EP-20/CA-921在环氧基与胺氢物质的量之比为1.1∶1、室温下固化3 h后60℃固化3 h的条件下,固化物的综合性能最佳,此时漆膜的柔韧性为1 mm、铅笔硬度2 H、附着力1级、耐冲击性≥50 kg.cm、耐水性(25℃)≥7 d、耐醇性≥30 d。The effects of the diameter and viscosity of epoxy resin dispersion,the molar ratio of epoxy group to amino hydrogen and the curing temperature on the properties of the cured water soluble modified amine from fatty acid methyl esters of tea oil soapstock were investigated by thermal gravimetric analysis（TGA）,differential scanning calorimetry（DSC）,mechanical pro-perty test and scanning electron microscopy（SEM）.It was shown from the results that the thermal stability of the cured film from the water-soluble modified amine CA-921 and the epoxy emulsion AB-EP-20 with smaller particle size and lower viscosity was better.When the water-soluble modified amine CA-921 cured with the epoxy emulsion AB-EP-20 in molar ratio of epoxy group to amine hydrogen 1.1 ∶1 at room temperature for 3 h and then 60 ℃ for 3 h,the cured film exhibited the optimum properties with flexibility 1 mm,pencil hardness 2 H,adhesion 1,impact resistance ≥50 kg·cm,water-resistance（25 ℃）≥7 d and alcohol-resistance ≥30 d respectively.

关 键 词：茶油皂脚脂肪酸甲酯 改性胺 水性固化剂 性能 

分 类 号：TQ351[化学工程]