螺旋挤土桩钻头优化分析  

Optimization Analysis on Drill Auger of Soil Displacement Screw Pile

作　　者：李志毅[1,2] 刘钟[1,2] 赵琰飞[1,2] 张慧东[1,2] 

机构地区：[1]中冶建筑研究总院有限公司,北京100088 [2]中国京冶工程技术有限公司,北京100088

出　　处：《同济大学学报（自然科学版）》2011年第8期1145-1149,共5页Journal of Tongji University:Natural Science

基　　金：国家财政部施工新技术研究与开发项目(财企【2006】376号);住房和城乡建设部科学技术项目(2008-K2-40)

摘　　要：首先基于通用非线性有限元软件ADINA对螺旋挤土桩钻头进行钻进成孔过程的三维有限元建模,研究钻头型式、螺距、土体等参数在同等条件下对钻机动力头输出扭矩的影响,然后通过模型钻头的钻进成孔模拟试验对螺旋挤土桩钻头进行进一步分析,以期得到所需成孔扭矩最小的优化钻头,最后通过短螺旋挤土灌注桩的现场成孔试验验证了数值仿真和模型试验结果的正确性.所得结论为螺旋挤土桩钻头的优化设计提供依据.Based on ADINA,a 3D auger-soil FEM model was developed to study the impact of pattern of the drill auger,screw-pitch and the soil parameter on the required torque.Secondly,the model tests of auger squeezing into cement-soil mixture were done to get the optimized drill auger with least torque.At last,on-site test result of drill auger squeezed into ground verified the correctness of the numerical analysis and model test.The conclusions in this paper can provide a basis for optimal design of drill auger.

关 键 词：螺旋挤土桩 螺旋挤土桩钻头 ADINA软件 优化分析 

分 类 号：TU443[建筑科学—岩土工程]