制备双金属复合材料的半固态成型法的研究  

A study of manufacturing bi-material composite parts though semisolid metal processing

作　　者：栗争光 胡雪[2] 黎天保 董建雄[1] 李斌[2] 杨昭[2] 

机构地区：[1]包头铝业有限公司,内蒙古包头014046 [2]中南大学材料科学与工程学院,湖南长沙410083

出　　处：《轻金属》2011年第7期76-80,共5页Light Metals

摘　　要：以半固态合金Sn-15%Pb和Pb-30%Sn为研究对象,探索应变诱发熔体激活(SIMA)触变锻造制备双金属复合材料的可行性。实验结果表明,半固态金属液体以层流方式流动;复合材料中的球状初晶仍维持各自成分性质和形貌特征;两种半固态合金的液相混合物限制在复合界面下的薄层中;原料的氧化皮在成形过程中撕裂,界面处没有氧化物富集层。This work evaluated the method of manufacturing bi-material composite parts by semisolid metal processing（SSP） through strain-induced melt-activated（SIMA） thixo-forging.Sn-15 pct Pb and Pb-30 pct Sn semisolid alloys were chosen as model alloys.The results showed that the composite semisolid fluid flowed in a laminar way.Globular primary grains in the two semisolid alloys maintained their respective geometry and constitutions.The mixture of two liquid phases was limited in a thin layer beneath the interface between the two semisolid alloys.The absence of an oxide-enriched layer at the interface suggests that the oxide skins of the feedstock were torn during the processing,leading to the formation of metallurgical bonding at the composite interface.

关 键 词：半固态成型 双金属复合材料 应变诱发熔体激活法 触变锻造 

分 类 号：TG249.26[金属学及工艺—铸造] TB331[一般工业技术—材料科学与工程]