植物纤维微纤维化对纸基摩擦材料磨损性能的影响  

Influences of Plant Fibre Fibrillation on the Friction and Abrasive Wear Properties of Paper-based Friction Material

作　　者：钟林新[1] 付时雨[1] 詹怀宇[1] 周雪松[1] 

机构地区：[1]华南理工大学制浆造纸工程国家重点实验室,广东广州510640

出　　处：《中国造纸》2011年第8期28-33,共6页China Pulp & Paper

基　　金：国家高技术研究发展计划(863计划)重点项目(2007AA100704);国家自然科学基金项目(30771689)的支持

摘　　要：探讨了植物纤维微纤维化对纸基摩擦材料摩擦、磨损性能的影响。研究表明,植物纤维微纤维化对纸基摩擦材料的孔隙结构、界面结合性能及摩擦性能调节剂的留着性能产生重要影响。与未微纤维化的材料相比,低微纤维化度对材料的孔隙结构影响不大,但能有效提高填料的含量及界面结合强度,因而材料的动、静摩擦因数较高,磨损率较低。随着纤维微纤维化程度进一步提高,材料孔隙下降使得摩擦材料与对偶之间形成的润滑油膜不能得到有效抑制或破坏,并导致润滑油热交换能力不足,动、静摩擦因数降低,材料热衰退加剧,磨损率增加。The influence of beating of plant fibres on the friction and abrasive wear properties of paper-based friction material was investigated.Results showed that the beating of plant fibres had remarkable influence on porosity,interfacial adhesion and filler retention.The plant fibres with low beating degree had no impact on the porosity of materials,but could significantly improve the interfacial adhesion and filler retention as compared with the sample without beating,which resulted in higher friction coefficient and lower abrasion.However,in the case of high beating degree,low porosity would lead to poorer heat diffusion from the work area,which gave rise to low friction coefficient and higher abrasion of the material.

关 键 词：纸基摩擦材料 微纤维化 磨损性能 

分 类 号：TB302.3[一般工业技术—材料科学与工程]