从动齿轮坯辗扩工艺优化  

Process Optimization of Driven Helical Gear Blank by Ring Rolling

作　　者：朱春东[1] 程孟彪[1] 周波[1] 朱庆宇 

机构地区：[1]武汉理工大学材料科学与工程学院,湖北武汉430070 [2]四川江油中恒特钢有限公司,四川绵阳621709

出　　处：《热加工工艺》2011年第15期114-116,共3页Hot Working Technology

摘　　要：采用开式辗扩方式进行从动齿轮坯辗扩,经过数值模拟和实验验证得到了飞边小且充填饱满的齿轮坯。模拟和实验结果表明,上下校形模角均为45°时毛坯无飞边或者有很少的飞边,并且能够很好地满足后续整形工艺要求,为类似毛坯的设计提供了参考。The open ring rolling process was used in the ring rolling process of driven helical gear blanks.The full-filled gear blanks with less flash or no flash were obtained after numerical simulation and experimental validation.The simulation and experimental results show that when the angles of upper and lower sizing die are all 45°,there is no flash or less flash,and can meet the requirements of the following shaping process very welll;the study provides a reference to similar blank design.

关 键 词：从动齿轮坯 辗扩 工艺优化 实验验证 

分 类 号：TG376[金属学及工艺—金属压力加工]