氢氟酸浓度对Ni-Cu-P镀层耐蚀性的影响  

Effect of Hydrofluoric Acid Concentrations on the Corrosion Resistance of Ni-Cu-P Coating

作　　者：王洪志[1] 胡传顺[1] 潘晓丽 梁平[1] 朱健 秦华[1] 

机构地区：[1]辽宁石油化工大学机械工程学院,辽宁抚顺113001 [2]抚顺市特种设备监督检验所,辽宁抚顺113006

出　　处：《石油化工高等学校学报》2011年第4期84-87,共4页Journal of Petrochemical Universities

基　　金：辽宁省教育厅科学技术研究项目(LS2010098)

摘　　要：利用金相显微镜观察了Ni-Cu-P化学镀层的表面形貌,采用浸泡法与电化学阻抗谱测试了Ni-Cu-P镀层在不同浓度氢氟酸溶液中的耐蚀性。结果表明,Ni-Cu-P镀层均匀、致密,在氢氟酸介质中表现出良好的耐蚀性能,且随着氢氟酸溶液浓度的增大,镀层的腐蚀速率呈先升高后降低的趋势。To study the corrosion of Ni-Cu-P electroless coating in different concentrations HF solution,surface morphology of Ni-Cu-P coating was analyzed by metalloscope graphic.The corrosion resistance of Ni-Cu-P coating was tested by soaking method and electrochemical impedance spectroscopy testing in different concentrations HF solution.The results show that Ni-Cu-P coating is uniform,dense and has good corrosion resistance in HF solution.With the increase of HF concentration,the corrosion rate of the coating appears to increases then decreases in different concentrations of HF solution.

关 键 词：Ni-Cu-P涂层 耐蚀性 氢氟酸 化学镀 

分 类 号：TG174.2[金属学及工艺—金属表面处理]