固体分子筛上环己烯水合工艺研究  

Study on Process of Cyclohexene Hydration over Solid Zeolite

作　　者：林清香[1] 陈幼坚 蔡贞玉[1] 朱明乔[1] 

机构地区：[1]浙江大学化学工程与生物工程系,浙江杭州310027 [2]浙江锦华新材料股份有限公司发展部,浙江衢州324000

出　　处：《化学反应工程与工艺》2011年第3期285-288,共4页Chemical Reaction Engineering and Technology

基　　金：浙江省自然科学基金(Y4080247);浙江省自然科学基金杰出青年团队(R4090358);浙江省重大科技专项计划项目(2010C01035)

摘　　要：通过对HZSM-5,Hβ,HUSY,HSSY等分子筛催化剂在环己烯水合反应体系中进行活性评价,得到较优的催化剂HZSM-5。考察了搅拌速度、反应温度、反应时间、催化剂含量、原料物质的量比等对HZSM-5分子筛催化环己烯水合反应的影响。得到较佳的反应条件为搅拌速度360 r/min,反应时间4 h,反应温度405 K,反应原料物质的量比n(C_6H_(10)):n(H_2O)为1:14,催化剂(HZSM-5)含量为20%质量分率。此时,环己烯转化率为9 84%,环己醇选择性为99.7%,环己醇收率为9.73%。同时还考察了HZSM-5分子筛的稳定性,重复实验5次,环己醇收率略有降低。The performance of HZSM-5, Hβ, HUSY and HSSY zeolites in cyclohexene hydration were tested, and HZSM-5 showed the superiority performance. The influences of rotation speed, reaction temperature, reaction time, catalyst content and the feed mole ratio on cyclohexene hydration over HZSM-5 zeolite （SiO2/Al2O3=25） were investigated. The optimal reaction conditions were as follows： rotation speed 360 r/min, reaction time 4 h, temperature 405 K, mass fraction of HZSM-5 zeolite 20% and molar ratio of cyclohexene to water in feed 1：14. Under the conditions, the cyclohexene conversion was 9.84%, the selectivity and yield of cyclohexanol were 99.7% and 9.73% respectively. At the same time, the stability of HZSM-5 zeolite was tested. The results showed that the yield of cyclohexanol decreased a little after reused 5 times.

关 键 词：环己烯 水合反应 环己醇 HZSM-5分子筛 

分 类 号：TQ032.41[化学工程]