2219铝合金搅拌摩擦焊接头裂纹尖端张开位移(CTOD)试验研究  

Ctod of 2219 Aluminum Alloy Friction Stir Welded Joints

作　　者：杜岩峰[1,2] 田志杰[2] 王一[2] 张彦华[1] 

机构地区：[1]北京航空航天大学机械工程及自动化学院,北京100083 [2]首都航天机械公司,北京100076

出　　处：《北京工业大学学报》2011年第9期1287-1291,共5页Journal of Beijing University of Technology

基　　金：国防基础科研项目(B0320060553)

摘　　要：采用裂纹尖端张开位移(crack tip opening displacement,CTOD)试验研究了2219铝合金搅拌摩擦焊(friction stir welding,FSW)接头各区域的断裂性能,分析了搅拌摩擦焊接头组织结构对接头断裂性能的影响.研究结果表明,2219铝合金搅拌摩擦焊接头的断裂呈韧性,但接头各区域韧性分布呈现明显的不均匀性,焊核区断裂韧性最好,热机影响区和热影响区次之,但均高于母材的断裂韧性.Fracture property of different regions of 2219 aluminum alloy friction stir welds was studied in terms of crack tip opening dispacement （CTOD）. Three-point bending specimens were used to measure the fracture toughness of various regions of 2219 aluminum alloy friction stir welds. CTOD values were calculated according to p-s curves obtained. Results show that the fracture of 2219 aluminum alloy friction stir weld is ductile and the distribution of fracture toughness is heterogeneous; the fracture toughness of weld nugget is the best following thermal-mechanical affected zone and heat affected zone, and base material is the weakest.

关 键 词：2219铝合金 搅拌摩擦焊 裂纹尖端张开位移 

分 类 号：TG407[金属学及工艺—焊接] TG453