超声辅助喷射电沉积Ni镀层的表面形貌及硬度  

Surface Morphology and Hardness of Ni Coatings by Ultrasonic Assisted Jet Electrodeposition

作　　者：谭俊[1] 吴迪[2] 高玉琳[3] 邹渝[2] 王远立[2] 

机构地区：[1]装甲兵工程学院装备再制造技术国防科技重点实验室,北京100072 [2]装甲兵工程学院科研部,北京100072 [3]装甲兵工程学院训练部,北京100072

出　　处：《装甲兵工程学院学报》2011年第4期80-83,共4页Journal of Academy of Armored Force Engineering

基　　金：军队科研计划项目

摘　　要：试验以直接超声方式,在喷射电沉积装置的基础上加载超声设备,分别在20℃和50℃两种镀液温度下在A3钢基体上制备了加载超声和不加载超声Ni镀层,研究了超声波及温度对Ni镀层表面形貌和硬度的影响。试验结果分析表明：在20℃条件下,超声可避免镀层裂纹的产生,提高镀层的硬度;在50℃条件下,超声可细化镀层的组织,且可显著提高镀层硬度;超声波对喷射电沉积层组织和性能的影响机理主要在于超声空化引起的析氢减少、细晶强化和加工硬度。The direct ultrasonic assisted jet electrodeposition equipment is used to prepare Ni coating on A3 steel substrate,with ultrasonic and without ultrasonic,at temperatures of 20℃ and 50℃ respectively.The influences of ultrasonic to surface morphology and hardness of Ni coatings are investigated.The results show that deposited with ultrasonic at 20℃,no crack is found in the coating and the hardness of the coating increases;deposited with ultrasonic at 50℃,the fine coating microstructure is obtained and the hardness of the coating increases evidently.The main mechanism of ultrasonic effect on the morphology and the performance of jet electrodeposition is the hydrogen reducing,fine grain strengthening and work hardening resulted by ultrasonic cavitation.

关 键 词：超声波 喷射电沉积 镀层 表面形貌 硬度 

分 类 号：TG174.44[金属学及工艺—金属表面处理]