基于组态王与PLC的空压机监控系统设计  

Design of air compressor's supervisory system based on Kingview and PLC

作　　者：李建刚[1] 刘延霞[1] 张龙[1] 

机构地区：[1]中国矿业大学信电学院,徐州221116

出　　处：《软件》2011年第5期93-96,共4页Software

摘　　要：本设计主要是研究恒压供气控制系统的硬件电路、恒压变频供气的控制方法、开发基于组态王的监控界面。整个系统是用PLC进行控制,组态王软件进行监控。PLC主要控制空压机的启动和停止以及各个从站之间的modbus通信,组态王用于读取压力和温度,对系统的工作状态监控和调整。整个系统自动化水平比较高,大大减少了人力物力,而且对于压力的变化能很快的做出反应,调节压力。该系统结构简单、成本、性能稳定,而且功能齐全,非常适合应用和推广。This design is mainly study the constant pressure air feed control system＇s hardware circuit,the constant pressure frequency conversion air feed control method and the development based on the Kingview software＇s monitoring contact surface.The overall system is carries on the control with PLC,Kingview software carries on the monitoring.The PLC primary control air compressor＇s start and the stop,Kingview uses in reading the pressure,so that we momentarily can understand the system message,makes the adjustment.The overall system automation level is quite high,reduced the manpower and resources greatly,moreover can very quickly make the response regarding the pressure change,the adjustment pressure.This system structure is simple,cost,stable property,moreover the function is complete,very suitable to apply and the promotion.

关 键 词：组态王 PLC 空压机 

分 类 号：TP277[自动化与计算机技术—检测技术与自动化装置]