润滑条件对温轧含磷IF钢组织性能的影响  

Effects of lubricate condition on microstructure and mechanical properties of ferritic rolled P-added IF steels

作　　者：郭卫民[1,2] 王作成[1,2] 刘胜[1,2] 王协彬[1,2] 宋立彬[1,2] 王晓[1,2] 萨茹拉[1,2] 杨子仪[1,2] 杨鲤源[1,2] 

机构地区：[1]山东大学材料液固结构演变与加工教育部重点实验室,济南250061 [2]山东大学材料科学与工程学院,济南250061

出　　处：《材料科学与工艺》2011年第4期59-63,68,共6页Materials Science and Technology

基　　金：山东省科技厅计划项目(9925)

摘　　要：为研究润滑条件对热轧高强钢板的组织和性能的影响机理,对热轧坯料分别进行了润滑和不润滑两种轧制,并对两种轧制条件下的钢板进行了显微组织观察及力学性能测试.结果表明:润滑条件对铁素体区热轧高强IF钢的屈服强度(σs)、抗拉强度(σb)、总延伸率(η)和n值影响不大,但对r值和Δr值有显著的影响.在未润滑条件下轧制的钢板的r值(0.96)明显低于润滑条件下轧制的钢板的r值(1.27),|Δr|(0.465)值则明显高于润滑条件下的|Δr|值(0.075).使用润滑轧制可以获得具有优异深冲性能的高强IF钢板.To figure out the influence mechanism of lubricant condition on microstructures and properties of warm rolled high strength IF steels and guide industrial production further,rollings with or without lubricants were performed,then microstructure observation and mechanical property test were carried out.The results show that：lubrication condition has little effect on yield strength（σ s）,tensile strength（σ b）,total elongation（η）and n value,but has prominent effect onΔr value and r value.Without lubrication,ferritic rolled steel sheet has lower r value（0.96）than that（1.27）of the steel rolled with good lubrication,and has higher ｜Δr｜value（0.465）than that（0.075）of the steel rolled with good lubrication.Lubricant rolling is applicable to get good deep drawability.

关 键 词：润滑条件 高强IF钢 铁素体区轧制 r值 深冲性能 

分 类 号：TG142.1[一般工业技术—材料科学与工程]