检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:CHEN Kai LIU Shubin YAN Han WU Weihao ZHAO Lei AN Qi LENG Yongbin YI Xing YAN Yingbing LAI Longwei
机构地区:[1]Department of Modern Physics, University of Science and Technology of China, Hefei 230026, China [2]State Key Laboratory of Particle Detection & Electronics, Hefei 230026, China [3]Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China
出 处:《Nuclear Science and Techniques》2011年第4期193-199,共7页核技术(英文)
基 金:Supported by the Knowledge Innovation Program of Chinese Academy of Science (KJCX2-YW-N27);the National Natural Science Foundation of China(10875119),and the 100-Talents Program of CAS
摘 要:An embedded single-board computer (SBC) system based on AT91RM9200 was designed for monitoring and controlling the digital beam position monitor system of Shanghai Synchrotron Radiation Facility (SSRF) through the Virtex-4 FPGA in the digital processing board.The SBC transfers the configuration commands from the remote EPICS to the FPGA,and calculates the beam position data.The interface between the FPGA and the SBC is the Static Memory Controller (SMC) with a peak transfer speed of up to 349 Mbps.The 100 Mb Ethernet is used for data transfer between the EPICS and SBC board,and a serial port serves as monitoring the status of the embedded system.Test results indicate that the SBC board functions well.An embedded single-board computer (SBC) system based on AT91RM9200 was designed for monitoring and controlling the digital beam position monitor system of Shanghai Synchrotron Radiation Facility (SSRF) through the Virtex-4 FPGA in the digital processing board. The SBC transfers the configuration commands from the remote EPICS to the FPGA, and calculates the beam position data. The interface between the FPGA and the SBC is the Static Memory Controller (SMC) with a peak transfer speed of up to 349 Mbps. The 100 Mb Ethernet is used for data transfer between the EPICS and SBC board, and a serial port serves as monitoring the status of the embedded system. Test results indicate that the SBC board functions well.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222