麦草碱法蒸煮黑液氮气加压热处理降黏技术  

Viscosity Reduction Technologies of Wheat Straw Soda Pulping Black Liquor by Heat Treatment with Nitrogen

作　　者：张进[1] 曹云峰[1] 刘祝兰[1] 熊林根[1] 

机构地区：[1]南京林业大学江苏省制浆造纸科学与技术重点实验室,江苏南京210037

出　　处：《纤维素科学与技术》2011年第3期45-49,共5页Journal of Cellulose Science and Technology

基　　金：江苏省制浆造纸科学与技术重点实验室资助课题(201017);"江苏省青蓝工程中青年学术带头人培养对象"省教育厅资助课题(164105308)

摘　　要：分别对麦草碱法蒸煮黑液热处理的用碱量、温度、保温时间三因素三水平和氮气加压热处理的用碱量、加热温度、保温时间、氮气压力四因素三水平方差分析工艺技术进行研究,发现温度对黏度的影响均是最大的,而保温时间和氮压对黏度的影响均比较小。另外,将处理后黑液浓缩至45%以上,氮气加压热处理的黑液黏度比单纯热处理的低,其原因将进一步研究。A three factor and three level orthogonal experiment was designed to study the effects of alkali charge, the maximum temperature and time at the maximum temperature on wheat straw soda pulping black liquor by heat treatment without nitrogen. And a four factor and three level orthogonal test was designed to study the effects of alkali charge, the maximum temperature, time at the maximum temperature and nitrogen pressure on wheat straw soda pulping black liquor by heat treatment with nitrogen. It was found that the maximum temperature was the key parameter that affects the viscosity of wheat straw pulping black liquor of these two treatment measures. The time at the maximum temperature and nitrogen pressure had little effect on the viscosity. In addition, the heat treatment with nitrogen could have a better viscosity-reducing effect after concentrated the treated black liquor to 45% and over. But the mechanism should be studied further more.

关 键 词：麦草 碱法蒸煮 黑液 热处理 氮气 

分 类 号：TS749.2[轻工技术与工程—制浆造纸工程]