Fenton法深度处理制浆中段废水的工程应用  

Engineering Application of Fenton Advanced Oxidation Process for Washing and Bleaching Effluent Treatment

作　　者：陈楠[1] 陈永利[1,2] 刘新亮[1] 陈国宁[1,2] 宋海农[1] 王双飞[1] 

机构地区：[1]广西大学,广西南宁530004 [2]广西博世科环保科技有限公司,广西南宁530007

出　　处：《中国造纸》2011年第B08期132-135,共4页China Pulp & Paper

摘　　要：介绍了采用Fenton法深度处理制浆中段废水的工程实例，考察了各处理单元的最佳工艺参数及连续运行时的处理效果。工程运行结果表明，该方法工艺简单、占地面积小、运行费用低、运行稳定且废水处理效果好。在3个月稳定运行期间，出水CODCr〈100mg／L，色度〈30倍，符合《制浆造纸工业水污染物排放标准》（GB3544-2008），达到了节能减排，保护环境的目的。Fenton process was used for the advanced treatment of washing and bleaching effluent. The operational parameters and the continuous running efficiency were investigated. Fenton process is characterized by easy operation, less occupied area, low running cost, steadily running and better treatment efficincy. During the three-month running period, the average CODc, concentration and the chromaticity of the oufllow are below 100 mg/L and 30, respectively. The effluent can steadily meet the standard of the national wastewater discharge for pulp and papermaking industry （GB3544-2008）.

关 键 词：FENTON 深度处理 制浆中段废水 工程运行 

分 类 号：X703.1[环境科学与工程—环境工程]