脱墨车间胶黏物的检测及控制  

Detection and control of sticky in deinking plant

作　　者：李红斌[1,2] 房桂干[1] 耿光林 邓拥军[1] 李萍[1] 沈葵忠[1] 焦健[1] 韩善明[1] 张革仓 王勇 

机构地区：[1]中国林业科学研究院林产化学工业研究所,南京210042 [2]山东晨鸣纸业集团股份有限公司博士后工作站,山东寿光262700

出　　处：《中华纸业》2011年第20期60-62,共3页China Pulp & Paper Industry

摘　　要：针对山东晨鸣纸业集团脱墨车间存在的胶黏物问题进行了分析,并采用生物酶进行处理,试验结果表明,胶黏物问题得到了较明显的改善,纸机车速提高了24m/min,纸机运行效率提高了1.42个百分点,日均断纸时间减少20min;吨纸综合成本降低约8.58元。Sticky problems existing in deinking plant of Shandong Chenming Paper Group Co., Ltd. were analyzed, and the problems of sticky for the workshop were dealt with enzyme. The results show that sticky problem gets a more significant improvement. The machine speed is increased by 24m/min, machine operating efficiency is improved by 1.42%, paper break time is reduced by 20 minutes average daily, comprehensive paper cost per ton is lowered by about 8.58 yuan.

关 键 词：胶黏物 生物酶 脱墨浆 

分 类 号：TS749.7[轻工技术与工程—制浆造纸工程]