控制底水分段完井的产能预测模型  

Productivity Forecasting Model of Selective Completion with Bottom Water Control

作　　者：单彦魁[1] 耿天鹏[2] 张林[1] 刘理明[1] 匡邵华[3] 裴郭慧[2] 

机构地区：[1]西南石油大学,成都610500 [2]大庆油田有限责任公司第四采油厂,大庆163511 [3]辽河油田,盘锦124000

出　　处：《重庆科技学院学报（自然科学版）》2011年第5期53-55,共3页Journal of Chongqing University of Science and Technology：Natural Sciences Edition

摘　　要：利用水平井技术开采底水油藏能够提高油藏的最终采收率,但同时又出现了底水脊进现象,目前还没有好的解决办法。在水平井下衬管、盲管和管外封隔器(ECP)组合的管柱完井时,对水平井完井进行分段优化来调整水平井的流入剖面,从而可以有效避免跟端附近出现的端部效应,减缓可能出现的底水脊进。在出水的情况下,通过压力检测,发现出水层位,实施有效的堵水措施。在带管外封隔器ECP及衬管(包括打孔管)完井方法下,分别建立油藏流动模型和井筒流动模型,对油藏流动和井筒流动进行耦合,得出产能预测模型。Horizontal well is used to enhance the oil recovery in the bottom water reservoir; however, the phenomenon of bottom cresting appears afterward, there is not good solution at present. With the combination of liner, blank pipe and ECP, the selective completion of horizontal well can be optimized to adjust the horizontal well inflow profile, which can effectively avoid the end effect near the heel, and this can delay bottom water cresting. In the case of water breakthrough, water producing location can be found through pressure testing, and effective water block can be performed. Based on the selective completion, this paper establishes the reservoir model and the pipe flow model and the coupling model, so the productivity forecasting model under this completion method is gained.

关 键 词：底水油藏 水平井 盲管 筛管ECP 产能预测 

分 类 号：TE155[石油与天然气工程—油气勘探]