SRM直驱伺服压力机的柔性控制建模与带负载仿真  

Simulation of flexible control model of servo press with loads directly driven by SRM

作　　者：尚万峰[1] 邵丽红[2] 赵升吨[3] 

机构地区：[1]西安科技大学机械工程学院,陕西西安710054 [2]郑州牧业工程高等专科学校信息工程系,河南郑州450011 [3]西安交通大学机械工程学院,陕西西安710049

出　　处：《锻压技术》2011年第5期57-62,共6页Forging & Stamping Technology

基　　金：国家自然科学基金资助项目(50575175);陕西省重大科技创新项目专项资金(07ZKC(二)03-04);陕西省教育厅科学研究计划(2010JK686)

摘　　要：针对压力机可控化和柔性化的需求,提出开关磁阻电动机直驱伺服压力机的混合闭环控制系统,建立了伺服压力机的机电数学模型和开关磁阻电动机柔性控制模型,并搭建了基于Simulink的开关磁阻电动机直驱伺服压力机仿真系统。最后,以拉深工艺为例研究该系统的带负载动态响应特性。仿真结果验证了该系统设计的合理性,为实际伺服压力机控制系统设计和调试奠定了理论基础。Due to the requirement of flexibility and controllability of servo press,a hybrid closed-loop control system of servo press directly driven by SRM was proposed,a mechatronics mathematic model of servo press and flexible control model of SRM were established,and then a Simulink-based model of SRM-drive servo press was made.Finally,a deep drawing example was given for further analyzing dynamic response characteristic of this control system.The simulation results verify that the design of this servo control system is proper,and provide a theoretic support for an actual design and adjustment of servo press.

关 键 词：伺服压力机 开关磁阻电动机 柔性控制 仿真 

分 类 号：TG315[金属学及工艺—金属压力加工]