检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:唐龙飞[1] 庄奕琪[1] 孔泽斌[2] 刘伟峰[1] 靳钊[1]
机构地区:[1]西安电子科技大学宽禁带半导体材料与器件重点实验室,陕西西安710071 [2]中国航天科技集团公司第八研究院第八〇八研究所,上海201109
出 处:《电路与系统学报》2011年第5期18-23,共6页Journal of Circuits and Systems
摘 要:提出了一种全新的低功耗PIE(Pulse Interval Encoded)解码及反向散射链路频率BLF(Backscatter Link Frequency)生成电路,用于符合EPC Gen2协议的无源超高频射频识别(UHF RFID)芯片。该电路在读写器发送命令时,产生控制信号。所产生信号控制两个积分器生成三个比较电压,并通过两个比较器进行比较,完成对PIE信号的解码;同时控制另一积分器,产生参考电压,控制弛张振荡器生成符合协议要求的BLF。基于TSMC0.18μm CMOS工艺的仿真结果表明,本文所提出电路在1V工作电压下功耗为1.36μW,采用该结构的芯片可以提高工作距离以及读取速率。In this paper,a novel low power PIE(Pulse Interval Encoded) decoder and backscatter link frequency(BLF) generator for UHF RFID transponders which meet the EPC Gen2 UHF RFID protocol are presented.Control signals are generated when the reader sends commands.Two integrators controlled by the control signals generate three voltages.By comparing these 3 voltages with two comparators,the circuits decode the PIE signal.Another integrator controlled by the control signals generates a reference voltage which makes a relaxation oscillator output a BLF that meets the Gen2 protocol.The simulation results under TSMC 0.18μm CMOS technology show that the total power of the proposed circuits is 1.36μW at 1V operating voltage.As a result,the tag with the proposed circuits can acquire longer read range and higher read rates.
关 键 词:超高频射频识别 PIE解码 反向散射链路频率 低功耗
分 类 号:TN432[电子电信—微电子学与固体电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200