检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]南京工业大学机械与动力工程学院,南京210009 [2]南京工程学院机械工程学院,南京211167
出 处:《中国科技论文在线》2011年第9期683-687,共5页
基 金:国家自然科学基金资助项目(10872088);高等学校博士学科点专项科研基金资助项目(20070291004)
摘 要:在对短纤维增强橡胶基密封复合材料横向拉伸受力分析的基础上,建立了材料横向拉伸强度的预测模型,讨论了材料横向拉伸强度随纤维长径比、体积含量以及温度变化的规律。结果表明:模型预测的横向拉伸强度与试验结果基本一致;材料横向拉伸强度与材料各组分的力学性能参数、细观结构参数以及温度有关,其随短纤维平均长径比和体积分数的增加而增加,随着温度的升高而减小。Based on the force analysis of short-fiber-reinforced rubber sealing composites subjected to the transversal tension,a model for predicting the transversal tensile strength of theses kinds of composites has been developed.The influence of the fiber aspect radio,fiber volume fraction and temperature on the transversal tensile strength was also investigated.The results indicated that the transversal tensile strengths predicted by the presented model are in good agreement with experimental data.The transversal tensile strength is largely related to some microstructural parameters and mechanic performances of the main components of the composites as well as the temperature.The transversal tensile strength increases with the increase of the average fiber aspect radio and fiber volume fraction,and decreases with the increasing of temperature.
关 键 词:复合材料 短纤维 橡胶基 密封 横向拉伸强度 预测
分 类 号:TB332[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38