基于滞回耗能谱的钢板剪力墙结构性态设计方法  

Performance based seismic design of steel plate shear walls using hysteretic energy spectrum

作　　者：孙国华[1] 顾强[1] 何若全[1] 方有珍[1] 

机构地区：[1]苏州科技学院江苏省结构工程重点实验室,江苏苏州215011

出　　处：《建筑结构学报》2011年第11期126-133,共8页Journal of Building Structures

基　　金：国家自然科学基金项目(50978175);江苏省高校自然科学基金项目(10KJB560004)

摘　　要：结构在地震作用下的损伤往往与地面运动的加速度循环特征密切相关,为反映这种地面运动特征,引入了累积延性比,并结合标准化的滞回耗能谱,提出了钢板剪力墙(SPSW)结构基于能量的性态抗震设计方法。该方法给出了SPSW结构中钢梁、钢柱、剪力墙板累积滞回耗能的计算方法,引入捏缩系数来反映构件的滞回特性,采用能力设计方法确定剪力墙板周边的梁、柱截面,确保SPSW结构在罕遇地震作用下出现理想的塑性机构。通过对1榀10层3跨的SPSW结构算例分析,采用弹塑性时程分析对所设计结构进行了验证。计算结果表明:结构最大楼层侧移平均值满足我国现行抗震规范的要求,与设计假定的目标侧移基本一致,验证了建议方法的合理性。The damages of buildings under earthquakes are related to cumulative effects of the ground motion.In order to reflect the ground motion effect,an energy-based seismic design method of steel plate shear wall,based on the normalized hysteretic energy spectrum and accumulated ductility spectrum,was proposed.The computation methods for accumulated hysteretic energy of steel beam,steel column,and steel plate infill wall were constructed.The different hysteretic behavior of steel components was taken into consideration by pinching parameters.Capacity design method was used to determine the sections of steel components,and to ensure that SPSW could produce the favorite failure mode under rare earthquakes.A ten-story,three-span SPSW was designed based on this new design method.The seismic behavior was evaluated by nonlinear time history method.The maximum average story drift of the example SPSW structure can meet the requirement of the Chinese seismic code.The reliability of this method is proved.

关 键 词：钢板剪力墙结构 性态设计 滞回耗能谱 累积延性比谱 

分 类 号：TU391[建筑科学—结构工程] P315.9[天文地球—地震学]