尾座的消失模铸造工艺及其模拟  

Technology ＆ Simulation of Lost Foam Casting for Tailstock

作　　者：李文凤[1] 申荣华[1] 张玉波[1] 吴彦文[1] 

机构地区：[1]贵州大学机械工程学院,贵州贵阳550003

出　　处：《铸造工程》2011年第6期14-16,共3页Foundry Engineering

摘　　要：通过分析尾座的结构、使用条件及技术要求，对该件进行了消失模铸造工艺设计；利用ProCaSt软件进行消失模铸造充型过程模拟，并对模拟结果进行了分析讨论。结果表明，尾座铸件的消失模铸造工艺方案是合理可行的。The lost foam casting process for tailstock was designed through the analysis of the structure, service conditions and technical requirements. The filling and solidification process of lost foam casting process was simulated and discussed by ProCast respectively. The results show that the lost foam casting process for tailstock is reasonable and practicable.

关 键 词：消失模铸造 工艺设计 充型模拟 

分 类 号：TG249.6[金属学及工艺—铸造]