铜铬合金搅拌摩擦焊焊接接头的组织与性能  

Microstructure and Properties of Friction Stir Welding Welded Joints for Cu-Cr Alloy

作　　者：谢虎[1,2] 宋练鹏[1,2] 龚习[1,2] 贺地求[3] 

机构地区：[1]中南大学材料科学与工程学院,长沙410083 [2]中南大学教育部有色金属重点实验室,长沙410083 [3]中南大学机电工程学院,长沙410083

出　　处：《机械工程材料》2011年第10期88-90,107,共4页Materials For Mechanical Engineering

摘　　要：采用硬度和电导率测试、光学显微镜和扫描电镜观察等方法研究了固溶态和时效态下铜铬合金的搅拌摩擦焊焊接接头的组织与性能。结果表明:铜铬合金搅拌摩擦焊接接头不同区域的显微组织有明显的差异;固溶态合金接头硬度最高值出现在焊核区,为78HB,距离焊缝中心越远硬度越低,电导率越小;时效态合金接头硬度最低值出现在热影响区,为91HB,电导率由基体到焊核区逐渐减小。The solid-solution treated and aged Cu-Cr alloy were welded by friction stir welding respectively, and the microstrueture and mechanical properties of welded joints were studied by hard test, electrical conductivity test, optical microscopy and scanning electron microscopy. The results show that the difference of microstructure between different zones in welded joint of friction stir welding for Cu-Cr alloy was distinct. The hardness value of weld nugget zone, 78 HB, in the joint of solid-solution treated alloy was highest, the farther to the welded seam center, the lower of the hardness and the electrical conductivity. The hardness value of HAZ, 91 HB, in the joint of aged alloy was lowest, and the electrical conductivity dropped gradually from matrix to welded nugget zone.

关 键 词：铜铬合金 搅拌摩擦焊 焊接接头 显微组织 

分 类 号：TG457.13[金属学及工艺—焊接]