铝对铁素体不锈钢的组织和力学性能的影响  

Effect of Aluminum on Microstructure and Mechanical Properties of Ferritic Stainless Steel

作　　者：张敏娟[1] 郑宏光[2] 张小农[1] 吴狄峰[2] 

机构地区：[1]上海交通大学复合材料国家重点实验室,上海200240 [2]宝钢股份研究院,上海200431

出　　处：《热加工工艺》2011年第20期54-56,共3页Hot Working Technology

摘　　要：基于常用铁素体不锈钢钢种439,通过降低硅含量,增加铝含量,得到了3种不同成分的低硅高铝不锈钢。采用金相显微镜研究了其微观组织,并通过拉伸试验及硬度测试对其力学性能进行了分析。结果表明,铝能促进439不锈钢的回复再结晶,细化晶粒。随着439不锈钢合金成分中铝含量的增加,冷轧退火板的晶粒尺寸较小,硬度、屈服强度和抗拉强度升高。Based on ferritic stainless steel 439, three types of low-silicon high-alumina stainless steels with different component were obtained by reducing silicon content and increasing aluminum content. The microstructure was studied using metallographic microscope, and their mechanical properties were analyzed through tensile test and hardness test. The results show that the alloying aluminum can promote the recrystallization and refine grain of stainless steel 439. When the aluminum content increases, the grain size of cold-rolled annealed panel becomes small, but the hardness, yield strength and tensile strength of stainless steel 439 increase.

关 键 词：铁素体不锈钢 铝 微观组织 力学性能 

分 类 号：TG146.2[一般工业技术—材料科学与工程]