基于无线USB的多点脉搏信号检测  

The Multi-Point Pulse Signal Detection Based on Wireless USB

作　　者：李伟博[1] 吴效明[1] 

机构地区：[1]华南理工大学生物科学与工程学院,广州510006

出　　处：《传感技术学报》2011年第10期1511-1516,共6页Chinese Journal of Sensors and Actuators

基　　金：广东省科技计划项目(2009B030801004)

摘　　要：为了弥补单探头传感器反映脉搏信息局限和RS232串口数据传输速率低、移动性差的缺陷,设计了基于无线USB的多点脉搏信号检测系统来采集三维立体脉搏信号。文中采用五点式PVDF压电脉搏传感器获取脉搏信号,使用ZigBee无线技术和USB接口技术传输数据。构建五点式压电传感器成中心点加四点矩阵分布的格局,应用EZ-USB FX2芯片作为USB接口芯片来构建协调器单片机CC2430和上位机的数据管道,使其工作在SLAVE FIFO模式。在界面上设置好采样时间,单击采样时间按钮可将采样时间命令下传给单片机CC2430。本系统可实时检测三维立体脉搏信号,且机动灵活性好。In order to make up for the shortcomings that the information reflected by the single probe pulse sensor is limited and the flexibility of the serial port RS232 is poor,this system is designed.The pulse signal is collected by the five points PVDF-piezoelectric sensor and the data is transferred by the USB interface and the wireless technology of ZigBee.The data channels are built between the coordinator chip CC2430 and PC through applying the chip EZ-USB FX2 as the USB interface chip.After the sampling time interval is set and the button of sampling time is clicked,the packets of sampling time interval will be passed down to the chip CC2430.This system can detect the three-dimensional pulse signal in real time and its mobility is plenty good.

关 键 词：脉搏信号检测 五点式PVDF压电脉搏传感器 ZigBee无线技术 EZ-USBFX2 

分 类 号：R318.6[医药卫生—生物医学工程]