检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]华中科技大学能源与动力工程学院,湖北武汉430074
出 处:《水电能源科学》2011年第11期205-208,共4页Water Resources and Power
基 金:国家自然科学基金资助项目(51036003;50721005);国家重点基础研究发展计划基金资助项目(2007CB206903)
摘 要:以水为流动介质,在微通道内添加堆叠金属丝网多孔介质,采用局部非热平衡假设和双能量方程模型,分析了内插不同目数金属丝网的微通道在层流状况下的传热与阻力特性,并采用数值计算方法对微通道热沉进行了数值模拟。结果表明,在微通道内插入多孔介质能显著提高热沉的对流换热系数、降低加热面平均温度,但阻力增加较大,且当插入的金属丝网目数为100目时,微通道热沉的对流换热系数较大,与填充其他目数金属丝网相比阻力增加较小。A numerical simulation is conducted to study the heat transfer and resistance characteristics in a microchannel heatsink by taking the water as flow medium. The micro-channel heatsink is filled with wire mesh treated as porous medium. Based on the local thermal non-equilibrium assumption and two-energy equation model, the heat transfer and resistance characteristics for laminar flow have been performed in a micro-channel heatsink filled with wire mesh of differ- ent meshes. The results show that when the micro-channel heatsink filled with porous medium, its heat transfer coefficient increases significantly and the average temperature of the heating surface decreases, but the resistance increases obviously; when the micro-channel heatsink filled with 100 wire meshes, the heat transfer coefficient is comparatively larger than that in the other situations, and the resistance increases comparatively less.
关 键 词:多孔介质 微通道 传热 阻力特性 数值模拟 金属丝网 局部非热平衡
分 类 号:TK124[动力工程及工程热物理—工程热物理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117