感光溶胶—凝胶法制备光波导薄膜微图案  

Fine Patterning of Optical Waveguide Films Fabricated by Photosensitive Sol-gel Process

作　　者：徐真武[1] 徐键[1] 徐清波[1] 董建峰[1] 

机构地区：[1]宁波大学信息科学与工程学院,浙江宁波315211

出　　处：《光电工程》2011年第11期68-72,共5页Opto-Electronic Engineering

基　　金：国家科技部基金(2006DFA52910);宁波市科技局基金(2008B10042;2009B21007);宁波大学王宽诚幸福基金;宁波大学学生SRIP项目;宁波大学研究生科研创新基金(G11JA006)资助项目

摘　　要：利用溶胶-凝胶法制备了有机-无机杂化光敏性SiO2-TiO2材料,在单晶硅基片上旋转涂膜,经前烘、紫外光固化、淋洗、后烘等步骤,在硅片上得到复制有掩模微图案的薄膜。用紫外-可见光-近红外分光光度计测试了薄膜的光透过吸收性质,用Fourier红外光谱仪测试了不同紫外光辐照时间下薄膜的红外振动吸收光谱,用高倍光学显微镜和扫描电子显微镜(SEM)观察制备得到的薄膜微图案。结果表明:薄膜在紫外可见光区域的光透过率约为90%,紫外光照能促使不同的官能团间发生缩聚反应,80℃前烘温度处理以及15min左右的紫外光辐照能够得到清晰、精确的薄膜微图案。Organic-inorganic hybrid Photosensitive SiO2-TiO2 materials were synthesized by a sol-gel process. The hybrid films were deposited on silica glass substrates and silicon wafers by spin-coating. After the process of prebaking, UV-light exposure and postbaking, the films with the same patterning of mask were obtained. The Optical transmittance and absorption of hybrid films were measured with a ultraviolet-visible-near infrared spectrometer. Their infrared spectra of films at different UV irradiation time were measured with Fourier infrared spectrometer. The surface micro-structures prepared were observed by optical microscopy with a high-resolution CCD camera and Scanning Electron Microscope （SEM）. The results show that light transmittances of the hybrid films are nearly 90% in the visible and near infrared range and UV curing has an effect of producing the photopolymerization of methacrylate species. Being prebaked at 80℃ and irradiated with UV light for 15 minutes are very crucial to get clear and precise patterns.

关 键 词：溶胶-凝胶法 光敏材料 微图案 紫外光固化 

分 类 号：O484[理学—固体物理]