GDX2包装机组小盒四面美容整形装置的改进  

Improvement of Device for Cigarette Packet Side Shaping in GDX2 Packer

作　　者：廖艳培[1] 侯明猷[1] 

机构地区：[1]广东中烟工业有限责任公司梅州卷烟厂,广东省梅州市梅江区环市北路514016

出　　处：《烟草科技》2011年第11期27-29,共3页Tobacco Science & Technology

摘　　要：GDX2包装机组小盒四面美容整形装置利用热胀冷缩原理对包裹透明纸后的烟包进行美容整形加工,由于设备在高速运转时,加热后烟包不能及时降温,烟包易出现错位粘连现象,导致烟包输送不到位,进而引发烟包堵塞及故障停机问题。为此,在美容整形装置的出口处增加了一套冷却吹风系统,并改进了小盒美容整形装置的上下支座,由此对加热后烟包的外表面进行冷却吹风,加快其降温速度。应用结果表明,采用吹风冷却方法有效解决了烟包错位粘连问题,烟包堵塞现象由改进前的36次/班降低为5次/班,提高了设备的有效作业率,保证了产品质量。The side shaping device in GDX2 packer shapes film-wrapped cigarette packets basing on the principle of thermal expansion. In the case that the heated cigarette packets fail to be cooled down timely under high speed running, staggered the neighboring packets would be bonded and not rightly positioned, then machine jam resulted. Therefore, a blower cooling system was installed at the exit of shaping device and the upper and lower guides of shaping device were modified to facilitate heat dissipation. The results of application showed that the said problem was effectively solved, the packet jam reduced from 36 to 5 times per shift, and the machine efficiency increased.

关 键 词：GDX2包装机组 透明纸 美容整形装置 吹风冷却 

分 类 号：TS434[农业科学—烟草工业]