塑料超声波焊接过程及质量研究 III焊接接头质量影响因素分析  

The welding process and quality in ultrasonic welding of plastics part III Analysis of effects on welded joint quality

作　　者：周玉生[1] 闫久春[1] 卢彤[1] 杨士勤[1] 

机构地区：[1]哈尔滨工业大学现代焊接生产技术国家重点实验室

出　　处：《材料科学与工艺》1999年第S1期59-62,共4页Materials Science and Technology

基　　金：国家自然科学基金! (596 750 54);国家重点实验室开放基金!的资助

摘　　要：从焊接工艺参数对焊件熔化状态及焊件熔化状态对接头质量的影响两个方面对塑料超声波焊接质量影响因素进行了研究 ,揭示了焊件熔化状态是影响接头质量的直接因素 .利用光学显微镜研究了接头的组织形貌 ,发现接头熔合区组织具有明显的取向 .对接头剪切和弯曲强度进行测试 ,发现接头力学性能具有各向异性 ,熔和区厚度和组织取向程度对接头有重要的影响 .The factors that affect joint quality are investigated from two aspects: effect of welding variables on the melt state and the melt state on the joint quality. It is revealed that the melting state is the direct factor affecting joint quality. The microstructure of weld fusion region is observed by using optical microscope. It is also found that there is strong orientation along transverse direction in the zone. The joint shear strength and bending strength are tested, the results show that the mechanics performance of the joint is anisotropic and strongly affected by the dimension of fusion zone and the degree of orientation.

关 键 词：塑料 超声焊接 焊接工艺参数 焊接质量 

分 类 号：TQ320.674[化学工程—合成树脂塑料工业]