宽阻带超宽带带通滤波器的设计  

Design of wide stop-band UWB band pass filter

作　　者：王志刚[1] 邢光龙[1] 高峰[1] 张福荣[1] 

机构地区：[1]燕山大学信息工程学院,河北秦皇岛066004

出　　处：《电子元件与材料》2011年第12期48-49,53,共3页Electronic Components And Materials

摘　　要：针对某些传统滤波器阻带较窄,抑制谐波性能差的缺点,对传统的阶梯阻抗谐振器(SIR)进行了改进,使之通带内回波损耗降低,频带增宽,同时利用缺陷接地结构(DGS)抑制谐波特性来增加阻带宽度,得到一款低插损滤波器,最后使用HFSS建模仿真。结果表明:该滤波器具有良好的通带效果,通带内插入损耗小于1 dB,回波损耗大于10 dB,其上阻带频率超过18 GHz,在17.5 GHz处的衰减大于29 dB,可以有效抑制谐波。Against some traditional filters had a poor performances on harmonic suppression and stop-band, a low insertion loss and widened band filter was designed by using improved the traditional stepped impedance resonator （SIR） and combined the defected ground structure （DGS） to increase the stop-band width. HFSS was used to simulating. Results show that the filter has desired performance, in the pass-band, the insertion loss and the return loss are 〈 1dB and 〉10 dB, respectively, the upper-stop-band frequency is 〉18 GHz, and the attenuation is 〉29 dB at 17.5 GHz. The filter can suppress harmonics effectively.

关 键 词：带通滤波器 阶梯阻抗谐振器 缺陷接地结构 超宽带 

分 类 号：TN713[电子电信—电路与系统]