镁和δ相对GH169合金组织和性能的影响及交互作用  

INFLUENCE OF Mg AND δ PHASE ON THE MICROSTRUCTURE AND PROPERTIES OF GH169 AND THEIR INTERACTION

作　　者：田耘 庄景云 杨锦炎 

出　　处：《钢铁研究学报》1990年第S1期75-82,共8页Journal of Iron and Steel Research

摘　　要：本文研究了Mg和δ相在GH169(Inconel718)合金中各自的作用及它们之间的交互作用。实验结果表明,适量的镁能提高该合金的高温塑性和持久寿命。一定数量的晶界δ相析出后,合金的高温缺口敏感性被消除。影响δ相析出的数量、形态、分布的因素是热加工参数——终加工温度和形变量。镁不影响δ相的析出规律。This paper presents the rote of Mg and δ phase in alloy GH169(Inconet 718) and their interaction Results show thet the high temperature ductility and the stress-rupture life increase after adding a small amount of Mg in the alloy. The notch-stress-rupture-sensitivity of the alloy disappears when δ phase precipitates at grain boundaries. The main factors which affect the morphology, quantity and distribution of δ phase are the hot forging parameters-finish temperature and forging reduction. Mg can not affect the preci-pitatian of δ phase.

关 键 词：Δ相 GH169 合金组织 缺口敏感性 再结晶组织 高温塑性 加工温度 占相 交互作用 加工参数 

分 类 号：TF4-55[冶金工程—钢铁冶金]