超声氧化处理对碳纤维表面性能的影响  

Influence of Ultrasonic Oxidation on Surface Properties of Carbon Fibers

作　　者：魏楠[1] 王经文[1] 

机构地区：[1]南京航空航天大学材料科学与技术学院,南京210016

出　　处：《机械工程材料》2011年第11期28-31,共4页Materials For Mechanical Engineering

摘　　要：为提高碳纤维与树脂基体的结合性能,通过超声氧化处理对碳纤维进行了表面改性;用扫描电镜、激光拉曼光谱仪对处理前后的碳纤维表面形貌、结构等进行了分析,并对碳纤维的浸润性及其与树脂基体间的结合性能进行了研究。结果表明:超声氧化处理后,碳纤维表面产生了更多的沟槽,且其石墨化程度有了一定提高;处理后碳纤维表面酸性官能团含量随处理时间的延长而增多,其与水的浸润性明显提高;与未处理的相比,处理后的碳纤维与环氧扫描基体的界面剪切强度提高了33%。In order to improve the binding performance between carbon fibers and resin matrix, the surface of carbon fibers was modified by ultrasonic oxidation. Surface morphology and structure of the carbon fibers before and after treating were analyzed by means of scanning electron microscopy and laser Raman spectrometer. The wettability of the carbon fibers and the binding performance with the resin matrix were investigated. The results show that there were more grooves on the surface of carbon fibers after ultrasonic oxidation, and the graphitization degree had a certain improvement. With the prolongation of treatment time, the content of acid functional group on the surface of carbon fiber increased, and the wettability of the carbon fibers with water was improved significantly. Compared with carbon fibers before treating, the interface shear strength between treated carbon fibers and epoxy matrix increased by 33%.

关 键 词：碳纤维 超声氧化处理 接触角 界面剪切强度 

分 类 号：TB332[一般工业技术—材料科学与工程]