焊接速度对7075铝合金搅拌摩擦焊接头强度和微观组织的影响  

Effect of Welding speed on Microstructure and Mechanical Properties of Welded joint of High-strength Aluminum Alloy by Friction Stir Welding

作　　者：何建军[1] 李玉斌[1] 李盛和[1] 谢志强[1] 

机构地区：[1]中国工程物理研究院,四川绵阳621900

出　　处：《热加工工艺》2011年第21期114-116,120,共4页Hot Working Technology

基　　金：中国工程物理研究院发展基金项目(2007A07001)

摘　　要：采用搅拌摩擦焊方法对7075铝合金板进行了焊接实验,探讨了焊接速度对接头强度和微观组织的影响。结果表明,焊速对焊接接头的焊核区、热机影响区及晶界沉淀相均有较大的影响。随着焊速的提高,焊核区的晶粒和沉淀相大小、形状、分布密度均发生较大变化,热机影响区的变形程度和形貌也发生了较大改变。组织和力学性能综合分析表明,选择合理的焊接速度有利于细化焊核区的晶粒组织,改善焊缝成型,提高焊接接头强度。The welding experiments of 7075 aluminum alloy sheet were carried out by friction stir welding, the influences of welding speed on the microstructure and mechanical properties were investigated. The results show the welding speed has an essential effect on the microstructure and precipitations of weld nugget zone, thermal-mechanical zone in friction stir welds. As the welding speed increasing, there is a considerable change for the grain size, precipitatiola size, distribution and density in weld nugget zone; the deformation degree and shape in the thermal-mechanical zone change a lot. The comprehensive analysis of microstructure and mechanical properties show that the reasonable choice of welding speed is conducive to refine the grain in nugget zone, and improve the weld configuration and mechanical properties.

关 键 词：搅拌摩擦焊 组织 力学性能 

分 类 号：TG453.9[金属学及工艺—焊接]