边界层分离点实时数据采集与处理系统的设计与实现  

Real Time Signal Collection and Processing System for Detecting Boundary Layer Separation Point of Micro-Aircraft

作　　者：丁英涛[1] 李博[1] 王竹萍[1] 仲顺安[1] 

机构地区：[1]北京理工大学信息与电子学院,北京100081

出　　处：《北京理工大学学报》2011年第11期1332-1336,共5页Transactions of Beijing Institute of Technology

基　　金：国家自然科学基金资助项目(60843005);北京理工大学基础研究基金资助项目(20070142018)

摘　　要：通过分析实时数据采集与处理的基本原理和系统构架,搭建了适用于微型飞行器边界层分离点检测的实时信号采集与处理系统.该系统主要由模拟低通滤波电路、模数转换电路(ADC)、场可编程门阵列(FPGA)控制电路及USB接口电路构成.测试结果为:基准电平0.1mV,峰峰值407mV,频率1kHz,满足边界层分离点实时检测和判定的要求.The accurate detection of the boundary layer separation point in real time has a great benefit to improve micro-aircraft＇s climb, maneuvering and pneumatic abilities. By analyzing the principle and framework of real time data collecting and processing system, a real time signal collecting and processing system, which could be applied to detect the boundary layer separation point of micro-aircrafts, has been proposed and developed. The system mainly consists of analog low-pass filter, analog to digital converter （ADC）, FPGA controlling circuits and USB interface circuits. The testing results show that the performance of developed system is good, which is well suitable for detecting and estimating the boundary layer separation point in real time.

关 键 词：边界层分离点 实时 模拟低通滤波电路 模数转换电路 

分 类 号：TP212[自动化与计算机技术—检测技术与自动化装置]