钻铤螺纹接头上卸扣过程力学分析  

Mechanical Analysis in Course of Making up and Breaking out of Threaded Joint of Drill Collar

作　　者：奚杰峰[1] 张春婉[2] 马新沛[1] 

机构地区：[1]西安交通大学材料科学与工程学院,西安710049 [2]西安摩尔石油工程实验室,西安710065

出　　处：《石油矿场机械》2011年第11期54-57,共4页Oil Field Equipment

摘　　要：摩擦因数是螺纹接头上卸扣过程中非常重要的参数之一。应用有限元软件对不同摩擦因数下的螺纹接头上扣和卸扣过程分别进行了建模计算,主要观察螺纹接头表面各个区域的受力状况,对受到接触应力较大的台肩面和螺纹牙扣进行重点分析。由于接触应力是导致螺纹接头发生粘扣等失效的直接原因,通过有限元模拟得到的结果可以用来指导实际上卸扣过程。Friction coefficient is one of the most important parameter in the course of making up and breaking out of the threaded joint of drill collar. In this paper, the effect of different friction coefficient was The stress dist and the connec thread joint,so studied in the course of making up and breaking out by finite element simulation. ribution on the thread joint was mainly observed, especially on the thread surface tion area. The contact stress is the direct reason causing failures like galling of the the result of the finite element simulation can be refered in the practice.

关 键 词：钻挺 螺纹 摩擦因数 有限元 应力分析 

分 类 号：TE921.201[石油与天然气工程—石油机械设备]