塔吊支架垂直度检测装置的研究  

Research of crane tower stents vertical degree detection device

作　　者：田立勇[1] 张兰芬[1] 孙聚涛[1] 李鸿键[1] 

机构地区：[1]辽宁工程技术大学机械工程学院,辽宁省阜新市123000

出　　处：《软件》2011年第8期31-32,60,共3页Software

基　　金：辽宁省教育厅基金(L2010284)

摘　　要：为了提高塔式起重机的稳定性及塔机操作人员的安全系数,研究了塔式起重机支架平衡检测系统。论文介绍了塔式起重机支架平衡检测系统的构成和平衡检测的工作原理,采用加速度传感器作为检测传感器,通过单片机进行数据采集和计算分析,得到塔式起重机支架垂直度数据,该系统是针对塔式起重机支架的垂直度进行监测,通过检测可以及时了解塔式起重机的倾斜程度,避免塔式起重机因倾斜过度而倒塌造成事故。经过实验验证,该塔式起重机支架平衡检测系统有很好的应用推广价值。In order to improve the stability of tower crane and tower crane operator safety coefficient,research this tower crane support balance detection system. This paper introduces the tower crane support balance detection system and detection of the working principle of balance. The acceleration sensor as detection sensor, through the single-chip microcomputer to collect data of calculation and analysis, get tower crane stents vertical degree data, this system is aimed at tower crane in support of vertical degree for monitoring. Through the test can prompt understanding tower cranes tilt rate, avoid tower crane collapsed because of excessive tilt cause accidents Experimental results show that the tower crane support balance detection system has good application value.

关 键 词：起重机械与运输机械 塔式起重机 平衡检测 倾角 

分 类 号：TH2[机械工程—机械制造及自动化]