检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:方允樟[1,2] 许启明[1] 郑金菊[2] 吕葆华[3] 潘日敏[2] 叶慧群[2] 郑建龙[2] 范晓珍[2]
机构地区:[1]西安建筑科技大学材料科学与工程学院,西安710055 [2]浙江师范大学数理与信息工程学院,金华321004 [3]金华市科技情报研究所,金华321000
出 处:《物理学报》2011年第12期539-544,共6页Acta Physica Sinica
基 金:国家自然科学基金(批准号:50871104;11079029);浙江省自然科学基金(批准号:Y4080324);陕西省自然科学基金(批准号:SJ08E101)资助的课题~~
摘 要:研究了Fe36Co36Nb4Si4.8B19.2合金薄带为磁芯的螺线管(FeCo基磁芯螺线管)的巨磁阻抗效应与磁芯长度之间的关系.研究结果表明,磁芯长度是影响FeCo基磁芯螺线管巨磁阻抗效应的重要因素.当磁芯长度小于螺线管长度时,磁芯螺线管巨磁阻抗的最大值(ΔZ/Z)max与磁芯长度呈线性关系,其线性相关系数可以根据电磁学理论推导得到;当磁芯的长度大于螺线管的长度时,由于漏磁作用,(ΔZ/Z)max与磁芯长度的关系偏离了线性关系,(ΔZ/Z)max与磁芯长度的关系曲线中有一个极值点,(ΔZ/Z)max在极值点达到最大.磁芯螺线管巨磁阻抗效应曲线的尖刺部分高度(ΔZ/Z)T与磁芯长度的关系也有类似的极值点,(ΔZ/Z)T在极值点达到最大值.磁芯螺线管巨磁阻抗效应曲线的尖刺部分对弱磁场敏感,受磁芯退磁场的影响明显,磁芯的退磁场与磁芯长度呈负指数关系.The relation between the length of the magnetic core (l) and the giant magnetoimpedance(GMI) effect of solenoid with magnetic core of Fe36 Co36 Nb4Si4.8 B19.2 ribbon which annealed with current 32 A/mm2 for 10 min,has been investigated.The result shows that there is a sensitive relation between l and GMI.There is a linear relation between the l and the maximum of the GMI (ΔZ/Z)max when l is smaller than the length of the solenoid l0.The linear correlation coefficient can be deduced from the electromagnetism theory.It should deviate from the linear relation when l is greater than l0.There is a maximum value of the (ΔZ/Z)max when the l reaches the best value.There is a similar relation between the height of the tip like part of the GMI profile (ΔZ/Z)T and l.There is a maximum value of the (ΔZ/Z)T when the l is the best value.The tip like part of the GMI profile,which responds to the weak magnetic field sensitively,is influenced by the demagnetizing field.There is a negative exponential relation between the demagnetizing field and the length of the magnetic core l.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117