三螺杆泵衬套的最小工作长度分析  

Analysis of the minimum working length of case in three screw pump

作　　者：王兆伍[1] 郑梅生[1] 单玉霞[1] 程爱华[2] 

机构地区：[1]南京林业大学机械电子工程学院,江苏南京210037 [2]黄山工业泵厂,安徽黄山245021

出　　处：《南京林业大学学报（自然科学版）》2011年第6期116-120,共5页Journal of Nanjing Forestry University：Natural Sciences Edition

基　　金：江苏省高校自然科学研究计划项目(08KJD460011)

摘　　要：摆线三螺杆泵的密封条件之一是衬套的长度必须满足最小工作的长度,才能将吸入腔和排出腔严密地隔开。通过接触线方程推导了衬套最小工作长度应满足的条件,并给出了不同密封腔的三维图形,可作为正确确定衬套长度,分析泵的瞬时流量、压力分布和容积效率等的理论依据。One of the conditions for sealing in three screw pump with cycloid profiles was that the length of case must not be less than the minimum working length,so that the suction and discharge chamber could be separated strictly.This study deduced the conditions from the equation of meshing that the length of case must meet,and gave the three dimensional graph of different sealing chamber.This study provided the theoretical basis for correct determination of case length,analysis of the instantaneous flow rate,pressure distribution and volumetric efficiency in three screw pump.

关 键 词：三螺杆泵 衬套长度 接触线方程 密封腔 

分 类 号：TQ460.4[化学工程—制药化工]