粗粒土在平面应变条件下的强度特性研究  被引量:9

Strength characteristics of coarse-grained soil under plane strain condition

在线阅读下载全文

作  者:施维成[1,2] 朱俊高[2] 张博[2] 余挺[3] 

机构地区:[1]常州工学院土木建筑工程学院,江苏常州213002 [2]河海大学岩土力学与堤坝工程教育部重点实验室,江苏南京210098 [3]成都勘测设计研究院,四川成都610072

出  处:《岩土工程学报》2011年第12期1974-1979,共6页Chinese Journal of Geotechnical Engineering

基  金:水利部公益性行业科研专项经营项目(200801133);河海大学岩土力学与堤坝工程教育部重点实验室开放基金项目(GH200904);常州工学院科研基金项目(YN1012)

摘  要:使用河海大学新型真三轴仪,对粗粒土分别进行3保持不变的等3平面应变试验和b=0(即常规三轴压缩)、b=0.25的等3等b[b(2 3)/(1 3)]试验,研究了粗粒土在平面应变条件下的应力路径、破坏时的中主应力系数、内摩擦角及破坏应力比的特点。试验结果表明,等3平面应变试验的应力路径介于b=0与b=0.25的等3等b试验之间;粗粒土在平面应变条件下破坏时的中主应力系数b介于0.15~0.2之间;粗粒土在平面应变条件下的内摩擦角比常规三轴压缩条件下的大5%~7%,而破坏应力比则比常规三轴压缩条件下的小13%~18%。最后提出一个由粗粒土常规三轴压缩试验测得的内摩擦角φtc求平面应变条件下的破坏应力比Mfp的计算公式Mfp=2.3sinφtc,可较好地模拟试验结果。Plane strain compression tests in which σ3 keeps invariable and experiments in which both σ3 and keep constant are performed on coarse-grained soil by means of the true triaxial apparatus recently developed in Hohai University.The characteristics of stress paths,parameter b at failure,angles of internal friction and peak values of stress ratio Mfp[=(q/p)fp] of coarse-grained soil under plane strain conditions are studied.The experimental results show that the stress paths of the plane strain tests exist between the b-constant tests in which b equals 0 and 0.25;the parameter b at failure is between 0.15 and 0.2 for coarse-grained soil under plane strain conditions;the angles of internal friction of coarse-grained soil under plane strain conditions are 5%~7% larger than those under triaxial compression conditions while the peak values of stress ratio of coarse-grained soil under plane strain conditions are 13%~18% smaller than those under triaxial compression conditions.Finally a formula expressed as Mfp=2.3sinφtc,which is verified by the test results of coarse-grained soil,is proposed to calculate the peak value of stress ratio,Mfp,under plane strain conditions from the angle of internal friction,φtc,obtained from conventional triaxial compression tests.

关 键 词:平面应变 粗粒土 内摩擦角 破坏应力比 真三轴仪 

分 类 号:TU43[建筑科学—岩土工程]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象