检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西北工业大学计算机学院系统结构系,西安710072 [2]中国电子科技集团公司第五十八研究所,江苏无锡214035
出 处:《计算机应用研究》2012年第1期203-206,共4页Application Research of Computers
基 金:国家"核高基"重大专项基金资助项目(2009ZX01034-001-002-003)
摘 要:针对嵌入式系统实时控制和信号处理的需求,建立了一种基于DSP架构的快速上下文切换机制,为实时处理提供了有力支持。机制采用两条独立的总线,分别用来传送地址和数据信息,实现地址和数据信息的并行传输,增加了上下文保存和恢复的带宽;同时应用影子寄存器与通用寄存器之间的切换,有效减少了对存储器的访问;引入对上下文的延后保存和提前恢复操作,解决了任务或中断嵌套调用时的低效问题,显著地提高了上下文切换的速度。This paper presented a novel mechanism of fast context switching based on DSP is presented according to the requirements of the real time controlling and signal processing in embedded systems,which provides a strong support for real-time processing.First,the mechanism involved two independent bus,dedicated for address and data information separately,that is to say,data and address information could be transmitted in parallel,which could expand the bandwidth for context saving and restoring;Furthermore,switching between shadow registers and general registers was adopted in order to reduce the amount of memory accessing;What's more,the method of post-saving and pre-restoring the context was used,with which the efficiency of the task or interrupt nesting was enhanced and the speed of context switching was confirmed to be improved significantly.
关 键 词:数字信号处理器 上下文切换 影子寄存器 中断嵌套
分 类 号:TP332[自动化与计算机技术—计算机系统结构]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.13