变截面折流杆换热器的流动与传热分析  

Analysis of Flow and Heat Transfer in Rod Baffle Heat Exchangers With Rods of Variable Sections

作　　者：马雷[1] 王英双[1] 杨杰[1] 刘志春[1] 刘伟[1] 

机构地区：[1]华中科技大学能源与动力工程学院,湖北武汉430074

出　　处：《工程热物理学报》2012年第1期113-116,共4页Journal of Engineering Thermophysics

基　　金：国家重点基础研究发展计划(No.2007Cb206903);国家自然科学基金资助项目(No.51036003;No.50721005)

摘　　要：本文在折流杆换热器的基础上,采用数值计算的方法,以水为流动介质,对不同折流杆间隔的折流杆式换热器进行流动与传热特性的分析。同时,本文设计了一种新型的变截面折流杆式换热器,对换热器进行优化,结果表明,变截面折流杆换热器比等截面折流杆换热器的综合性能最多高13%～14%。In this paper, the flow and heat transfer characteristics with water on combinations of rod baffle with different distances is analyzed by numerical simulation on the basis of rod baffle heat exchanger. Meanwhile, the present study designs a new type rod baflte heat exchanger which has variable sections to optimize heat exclhanger. The simulation result indicates that the comprehensive performance of variable sections rod baffle heat exchanger increased by 13%-14% at maximum than uniform section rod baffle heat exchanger.

关 键 词：换热器 折流杆 变截面 数值模拟 强化传热 

分 类 号：TK124[动力工程及工程热物理—工程热物理]