矿用超高水充填材料制浆系统研究与应用  

Research on Slurrying System of Mine Ultrahigh-water Packing Materials and Its Application

作　　者：贾凯军[1] 冯光明[1] 李风凯[1,2] 

机构地区：[1]中国矿业大学矿业工程学院,江苏徐州221116 [2]邯郸矿业集团陶一煤矿,河北邯郸056105

出　　处：《山东科技大学学报（自然科学版）》2011年第6期8-14,共7页Journal of Shandong University of Science and Technology(Natural Science)

基　　金：国家自然科学基金项目(50774077)

摘　　要：制浆系统是整个充填系统的核心。为使超高水材料充填开采技术适应于工业化应用,以陶一矿超高水材料充填开采试验为背景,结合该材料特性,对制浆系统进行了较为深入的研究。确定了制浆系统的形式和生产能力;对半连续制浆系统各组成部分进行了详细设计,并评价了其应用效果。研究表明:超高水材料浆液制备宜选用半连续制浆系统,该系统运行稳定可靠、制浆能力大、浆液配比准确、操作简便(完全由PLC自动控制),能够满足超高水材料充填开采的制浆要求;该系统占用体积较大,运行环节较多,布置在井下时硐室通风条件较差,生产时易产生较大粉尘和噪声,应进行进一步改进;系统更适宜布置在地面上,若布置在井下,应加强硐室的通风管理。Slurrying system is the core of the whole filling system. In order to let the ultrahigh-water material backfill mining technology adapt to industrialized application, the slurrying system was studied in-depth with the background of the technical test in Tao-one Coalmine. The form of slurrying system and the production capacity were determined. Each part of the semi-continuous slurrying system was designed in detail and its application effect was evaluated. The results show that the semi-continuous slurrying system is the better choice for the preparation of ultrahighwater material grout and the system not only runs stable and reliable and makes accuracy ratio of slurry,but also it is of great slurrying ability and simple operation （all operations are controlled by PLC）, satisfying the needs of slurry preparation. However,it has a larger volume and more operation links and underground chambers have poor ventilation. Besides,dust and noise are bigger in the production process. Therefore, further improvement should be done in the future. In general, this system should be placed on the ground, if not, the chamber ventilation management would be strengthened.

关 键 词：超高水材料 充填工艺系统 浆体制备 半连续 

分 类 号：TD402[矿业工程—矿山机电]