基于ANSYS的矿用提升机卷筒应力分析  

Stress Analysis of Mine Hoist Drum Based on ANSYS

作　　者：李新华[1] 张小明[1] 陈金亮[1] 

机构地区：[1]河南理工大学机械与动力工程学院,河南焦作454000

出　　处：《煤矿机械》2012年第1期87-89,共3页Coal Mine Machinery

摘　　要：应用ANSYS有限元软件建立2JK2×1.8矿井提升机卷筒三维有限元分析模型,进行了卷筒结构的强度分析,研究了卷筒在正常载荷下的应力分布规律及变形情况,并根据卷筒易损坏部位及其特点,对卷筒进行了局部结构改造,分析对比改造前后卷筒应力分布规律及变形情况,找出合理的结构改造方案。The finite element model of 2JK2×1.8 strength analysis of drum structure based on deformation of the drum in normal load was mine hoist drum was estabilished and carried out the ANSYS software. The stress distribution law and analyzed. This paper studied the local structural modification of drum according to the easily damage position and its characteristics and compared the stress distribution and deformation law before transformation.

关 键 词：提升机卷筒 应力 强度分析 

分 类 号：TD534[矿业工程—矿山机电]