检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:龚顺风[1] 邓欢[1] 朱升波[1] 金伟良[1]
出 处:《振动与冲击》2012年第2期20-24,100,共6页Journal of Vibration and Shock
基 金:浙江大学国防预研基金资助项目;浙江省"钱江人才"计划资助项目(QJD0702006)
摘 要:当爆炸在结构构件表面发生时,产生的冲击波将会对结构构件造成损伤和破坏,而准确预测潜在的爆炸对结构构件造成的损伤是进行重要建筑物和防护结构抗爆设计的基础。为研究近爆作用下钢筋混凝土板的抗爆性能,采用AUTODYN软件建立了混凝土和钢筋的三维分离式实体模型,数值模型考虑了应变率对钢筋和混凝土材料动力本构特性的影响以及炸药-空气-结构之间的流固耦合相互作用,分析了不同炸药量作用下钢筋混凝土板的损伤机理和破坏特征,合理展现了钢筋混凝土板从混凝土开裂、碎片形成、部分钢筋屈服断裂到板局部震塌的动态演变过程。随着炸药量的增大,钢筋混凝土板的破坏模式逐渐由整体弯曲破坏转变为局部的冲切破坏。When an explosion occurrs at surfaces of structural components,the tremendous shock wave leads to structural damage and destruction,thus correctly predicting damages caused by any potential explosion is essential to design of important buildings and protective structures.In order to identify the anti-explosion performance of a RC slab under close-in explosion,using commercial hydrocode AUTODYN,a three-dimensional solid model including explosive,air and a RC slab with concrete and reinforcing bars separated was created,sophisticated concrete and reinforcing bar material models considering strain rate effects and appropriate coupling at air-solid interface were used to simulate the dynamic response of the RC slab,the corresponding damage mechanisms and failure modes were analyzed under different explosive charge.The dynamic evolution process of the RC slab from cracking and break-up of concrete,yield and rupture of reinforcing bar to local perforation was observed realistically,and with increase in explosive charge,the failure mode of the RC slab gradually changed from overall flexure failure to local punching failure.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.194