ZnO-CuO/ATP催化氧化降解印染废水  

Study on Catalytic Oxidation Process of ZnO-CuO/ATP for Dyeing Wastewater

作　　者：魏科年[1] 姚超[1] 

机构地区：[1]常州大学石油化工学院,江苏常州213164

出　　处：《非金属矿》2012年第1期61-62,66,共3页Non-Metallic Mines

基　　金：江苏省产学研前瞻性联合研究项目(BY2010123)

摘　　要：采用浸渍法和化学沉淀法,以凹凸棒石(ATP)为原料,制备了ZnO-CuO/ATP纳米复合材料,并利用该复合材料对酸性嫩黄G染料模拟废水进行催化氧化处理。考察了ZnO和CuO负载量、复合材料用量、臭氧流量、反应时间以及pH值等因素对印染废水色度去除率的影响。结果表明:当ZnO含量为50%,复合材料用量为1.5 g/L、O3流量为40 L/min、pH值为4.6时,催化反应3 h后,酸性嫩黄G的色度去除率可达99.24%。ZnO-CuO/ATP nanocomposite was prepared by impregnation and chemical precipitation method.The catalytic activity of ZnO-CuO/ ATP was investigated by oxygenating acid yellow G. The effects of ZnO content, Amount of ZnO-CuO/ATP, 03 flow rate and solution pH value on chroma removal rate are respectively investigated in detail. The result shows that the chroma removal rate can be 99.24% after 3 h with the dosage of ZnO-CuO/ATP 1.5 g/L, ZnO content 50%, O3 flow rate 40 L/min, pH value 4.60.

关 键 词：凹凸棒石 纳米复合材料 催化氧化 酸性嫩黄G 

分 类 号：X703[环境科学与工程—环境工程] X788