具有金刚石涂层的高速钢刀具预处理工艺研究  

Research on Pre-treatment Process of High-speed Steel Tool with Diamond Coating

作　　者：王雅[1] 张克仁[1] 马玉平[1] 刘牛[1] 

机构地区：[1]安徽建筑工业学院机电学院,安徽合肥230601

出　　处：《热加工工艺》2011年第24期185-187,共3页Hot Working Technology

基　　金：安徽省教育厅自然科学项目(KJ2010B045);安徽省教育厅自然科学重点项目(KJ2011A066);安徽高等学校省级优秀青年人才基金资助项目(20105QRL091)

摘　　要：利用化学镀方法在高速钢刀具表面镀上Ni-P复合涂层,用不同的检测手段对其表面形貌、成分进行检测分析。同时通过热丝CVD沉积装置在预处理后的刀具表面生长一层金刚石薄膜,并对金刚石薄膜的表面形貌及成分进行了观察和分析。结果表明该预处理方法是可行的。The Ni-P complex coating on high speed tool was prepared using chemical plating methods, and the surface morphology and content were characterized by different testing techniques. Meanwhile, the diamond coating was deposited on the pretreated HSS tool through HFCVD system. The surface morphology and content were observed and tested. The results show that the chemical plating treat method for HSS tool is suitable and applicable.

关 键 词：高速钢刀具 预处理 化学镀 金刚石涂层 

分 类 号：TG178[金属学及工艺—金属表面处理]