20Cr钢激光焊接工艺与焊缝组织性能  

Study on Laser Welding Process and Microstructure of Welded Joint for 20Cr Steel

作　　者：王能庆[1] 童彦刚[1] 杨小坡[1] 贺晓娜[1] 

机构地区：[1]重庆大学材料科学与工程学院,重庆400044

出　　处：《热加工工艺》2012年第1期119-120,共2页Hot Working Technology

摘　　要：研究了激光功率对20Cr钢焊接接头热影响区宽度和显微组织的影响。结果表明,随着功率增大,热影响区宽度增大,其出现的淬火组织明显减少,焊缝晶粒变得粗大;焊接接头显微硬度分布不均匀,出现较高的硬度和较陡的硬度梯度。Effects of laser power on weld macro-appearance and microstructure of HAZ for 20Cr steel were studied.The results show that with increasing the laser power,the width of HAZ increases;the hardened structure obviously decreases;the weld grain becomes coarse;the hardness distribution of the weld is non-uniform,showing high micro-hardness and steep micro-hardness gradient.

关 键 词：20CR钢 激光焊 焊缝组织 焊接参数 

分 类 号：TG456.7[金属学及工艺—焊接]