检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王国刚[1,2] 穆静静[1,2] 周红伟[1,2] 苗文华[1,2] 刘中良[3] 刘耀民[3]
机构地区:[1]中国电力科学研究院 [2]北京国电富通科技发展有限责任公司,北京100070 [3]北京工业大学教育部传热强化与过程节能重点实验室,北京100124
出 处:《工程热物理学报》2012年第2期282-284,共3页Journal of Engineering Thermophysics
基 金:国家自然科学基金资助项目(No.51007083);国家电网公司电网防冰减灾关键技术研究专项项目(No.AKZ3080760)
摘 要:本文利用自行设计的新型表面覆冰垂直粘结强度测试装置,测试了不同材料表面的覆冰垂直粘结强度,并探讨了基体表面粗糙度、冻冰时间、冰层厚度、冻冰温度等因素对同一材料表面覆冰垂直粘结强度的影响。结果发现,覆冰垂直粘结强度随着材料表面粗糙度增加而增大,随着冰冻温度的升高而降低。而冻冰时间与冰层厚度对覆冰垂直粘结强度的影响较为复杂。The vertical ice adhesion strength on different material surface had been measured by the novel designed device, and the influence factors of vertical ice adhesion strength on the surface of same material had been discussed, such as the material surface roughness, freezing time, ice thickness, icing temperature etc. It was found that the vertical ice adhesion strength was increased with increasing the material surface roughness, but decreased with increasing icing temperature. However, it was complicated that the effect of the freezing time and ice thickness on the vertical ice adhesion strength.
分 类 号:TH12[机械工程—机械设计及理论]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.30