QPQ技术与中性盐雾试验  

QPQ Technology and Neutral Salt Spray Test

作　　者：李远辉[1] 王静[1] 丁义超[1] 姜自莲[1] 

机构地区：[1]成都电子机械高等专科学校实训基地,四川成都610031

出　　处：《热加工工艺》2012年第2期140-142,共3页Hot Working Technology

基　　金：国家自然科学基金资助项目(51071130)

摘　　要：为提高QPQ处理零件的抗中性盐雾试验时间,根据近年来的试验和炉前经验总结,对QPQ零件的设计和QPQ处理的具体工艺进行了分析,提出了建议。设计时要避免出现尖锐的棱和角,机械加工时表面粗糙度要低,标记要避免深窄的点或线。氮碳共渗前尽量让零件表面和盐浴清洁,避免零件在保存时生锈,保证氰酸根含量适中。预热时零件呈蓝紫色为好,批量生产时,要随时根据检测结果适度调整QPQ工艺参数,获得优质产品。To improve the corrosion resistance of QPQ treated machine parts in neutral salt spray tests,the design and QPQ treatment technics were analyzed.The existence of sharp edges and corners in design stage should be avoided.The surface roughness should be low and the trace of mark should be wide and shallow.Before QPQ treatment,the nitriding salt,the oxidizing salt and the surface of machine parts should be cleaned.The cyanate contents should be controlled to appropriate value.In preheating stage,the best colour is purple blue.In batch production,the parameters of QPQ techniques should be regulated according to the salt spray test results,the colour and the microstructure of the machine parts.

关 键 词：QPQ技术 盐雾试验 盐浴氮碳共渗 盐浴氧化 

分 类 号：TG156.3[金属学及工艺—热处理]