新型陶瓷连接材料(Pr_(0.5)Nd_(0.5))_(0.7)Ca_(0.3)CrO_(3-δ)-Sm_(0.1)Gd_(0.1)Ce_(0.8)O_(1.9)的制备与性能  

Preparation and Performance of Novel Ceramic Interconnect Materials (Pr_(0.5)Nd_(0.5))_(0.7)Ca_(0.3)CrO_(3-δ)-Sm_(0.1)Gd_(0.1)Ce_(0.8)O_(1.9)

作　　者：丁岩芝[1] 卢肖永[1] 林彬[1] 王小连[1,2] 陈永红[1,2] 

机构地区：[1]淮南低温共烧材料省级实验室,淮南师范学院化学与化工系,安徽淮南232001 [2]安徽理工大学化工学院,安徽淮南232001

出　　处：《硅酸盐学报》2012年第2期256-260,共5页Journal of The Chinese Ceramic Society

基　　金：淮南市科技计划(2010A03203);安徽省教育厅自然科学基金(KJ2009B080Z)资助项目

摘　　要：采用络合燃烧法制备(Pr0.5Nd0.5)0.7Ca0.3CrO3-δ(PNCC)-Sm0.1Gd0.1Ce0.8O2-δ(SGDC)复合陶瓷连接材料。利用X射线衍射仪和扫描电子显微镜对烧结体的物相和微观结构进行了表征,采用四端探针法测量电导率。结果表明:PNCC和SGDC在高温烧结时具有稳定的物相和良好的化学相容性,SGDC掺杂量为5%(质量分数)的样品,在1 400℃烧结5 h,相对密度高达97.1%;700℃时,烧结陶瓷体在空气和氢气气氛中的电导率分别为47 S/cm和4S/cm;室温至1000℃范围内,样品的热膨胀系数为10.4×10-6K-1,与中温电解质的热膨胀系数接近,说明SGDC掺杂的PNCC体系有望成为良好的中温固体氧化物燃料电池复合连接材料。A composite of （Pr0.5Nd0.5）0.7Ca0.3CrO3-δ（PNCC）-Smo.lGdo.lCeo.8O2-δ （SGDC） interconnect materials was synthesized by a sol-gel auto-ignition process. The phase and microstrucatre of the sintering sample were analyzed by X-ray diffraction and scanning electron microscope, respectively. The electrical conductivity of the samples was measured by four-probe technique. The results indi- cated that PNCC was chemically stable against reaction with SGDC at high temperatures. For 5% （in mass） SGDC, the relative den- sity of the sample was 97.1% after sintering at 1 400 ℃ for 5 h, and the electrical conductivity of the sample reached 47 S/cm in air and 4 S/era in Hz at 700 ℃. The average thermal expansion coefficient of the sample was 10.4 x 10-6 K^-1 at room temperature to 1 000 ℃, which is close to that of electrolyte. Results indicate that the PNCC/SGDC composite is a very promising interconnect material for intermediate solid oxide fuel cells.

关 键 词：固体氧化物燃料电池 陶瓷连接材料 烧结活性:热膨胀系数 

分 类 号：O614.33[理学—无机化学]