RH精炼装置流场对混合、脱碳、夹杂物行为的影响  

Effect of Flow Field on Mixing,Decarburization and Inclusion Removal in RH Degasser

作　　者：耿佃桥[1] 雷洪[1] 赫冀成[1] 

机构地区：[1]东北大学材料电磁过程研究教育部重点实验室,辽宁沈阳110819

出　　处：《过程工程学报》2011年第6期919-925,共7页The Chinese Journal of Process Engineering

基　　金：国家高技术研究发展计划资助项目(编号:2009AA03Z530);国家自然科学基金和上海宝钢集团公司联合资助项目(编号:50834010);高等学校学科创新引智计划资助项目(编号:B07015);辽宁省博士启动基金资助项目(编号:20111009);中央高校基本科研业务费资助项目(编号:N100409007)

摘　　要：基于计算流体力学、反应热力学及动力学,对RH气液流场、脱碳及夹杂物碰撞长大进行了数值模拟.结果表明,在提升气量为400NL/min条件下,气泡在上升管存在贴壁效应;1000NL/min下,侧吹气体可形成吹透现象;RH脱碳处理中,0～3s的脱碳速率为45～70mol/s,3～500s时降低到5mol/s,500s后脱碳速率进一步降低;经过14min处理后夹杂物质量浓度可降低到5×10-5以下;数值模拟结果与实验测量结果符合良好,说明数值模拟方法可完全用于RH真空精炼过程中关键工艺参数的预测.Based on the computational fluid dynamics,reaction thermodynamics and kinetics,the gas-liquid flow field,decarburization,collision and aggregation behavior among inclusions were investigated by numerical method. The numerical results show that the gas bubbles rise up near the wall in the up snorkel when the gas flow rate is 400 NL/min. The gas bubbles can reach the up snorkel centre when the gas flow rate increases to 1000 NL/min. The decarburization rate is about 45～70 mol/s during the first 3 s,decreases to 5 mol/s during 3～500 s,and decreases further after 500 s. And the inclusion mass concentration can be decreased to 5×10-5 after 14 min treatment. Furthermore,the predicted results agree well with the measured experimental results. Thus,the numerical simulation method can be employed to predict the critical technologic parameters during RH vacuum refining process.

关 键 词：数值模拟 RH 流场 脱碳 夹杂物去除 

分 类 号：TF111.18[冶金工程—冶金物理化学]